The Structure

The model's support structure was constructed from fir wood strips and plywood sheets and is composed of four separate, independent pieces joined together with screws, nuts, and washers.

Each table consists of a rectangular outer frame made of 20x80 mm fir wood strips, reinforced with appropriately positioned internal strips (to allow for the opening of inspection hatches). Everything was glued and secured with screws. The legs were also made from 30x60 cm fir wood strips; each leg was equipped with a swivel wheel for easy future movement.

A triangular element was then added to the three tables, to which an additional support leg was added. A total of 13 legs, each equipped with a swivel wheel, support the structure. This ensures the weight is evenly distributed across the entire surface.

The legs are anchored to the outer frame of each table with glue and screws, and then joined together on the short side of the table and to the frame itself with 45° slats. This provides sufficient rigidity to the overall structure.

A 1.5 cm poplar plywood panel completes the structure.